| Title | Comparison of Theoretical and Observed Pressure Profiles in Geothermal Wells |
|---|---|
| Authors | R. Marquez M. |
| Year | 1981 |
| Conference | DOE-CFE Symposium on Cerro Prieto |
| Keywords | |
| Abstract | Debido a la gran importancia practica que el flujo ados fases tiene en varias ramas de la industria, la materia ha recibido fuerte atencion. La situacion de flujo bifasico dentro del aprovechamiento de energia geotermica, puede presentarse como una mezcla de agua-vapor en una o en todas de las tres secciones principales que comprenden un sistema geotermico en explotacion: el yacimiento en si, el pozo geotermico y la transmision de fluido en la superficie. El presente estudio se relaciona directamente con lo que es pozo geotermico y especificamente encaminado hacia la prediccion dE caidas de presion. La capacidad de predecir con cierto grado de exactitud el perfil de presion a lo largo de un pozo, produciendo una mezcla de agua y vapor bajo varias condiciones de operacion, resulta de gran importancia ya que tendria varias aplicaciones tales como: la optimizacion del diametro de produccion, la identificacion de la zona con probable depositacion de carbonato de calcio y, probablemente de mayor interes para Cerro Prieto, el combinar este conocimiento de comportamiento de pozo con un programa de simulacion del yacimiento, permitiendo asi un modelado completo con el cual se pueda predecir la produccion a largo plazo y determinar con anticipacion el comportamiento del yacimiento al abatirse parcialmente. The subject of two-phase flow has received a great deal of attention because of its practical importance in several fields of technology. In the utilization of geothermal energy, two-phase watersteam flow conditions are present in the three main sections comprising a geothermal system under exploitation, namely, in the reservoir itself, in the geothermal wells, and in the fluid transmission lines on the surface. The present study is directly related to geothermal wells and is specifically aimed at predicting pressure drops in these wells. The ability to predict with some degree of accuracy the pressure profile along a well producing a water and steam mixture under various operating conditions is of great importance because it could be applied in several areas, such as, optimization of production casing diameters and identification of likely locations of calcium carbonate precipitation. Of greater interest at Cerro Prieto is the ability to couple the behavior of the well with a reservoir simulation program. This would permit a comprehensive model to be developed with which long range production can be predicted and which can anticipate the behavior of the reservoir with depletion. |