| Title | Technology, Development Status, and Routine Application of Thermal Response Test |
|---|---|
| Authors | Burkhard Sanner, Erich Mands, Marc Sauer & Edgar Grundmann |
| Year | 2007 |
| Conference | European Geothermal Conference |
| Keywords | Ground source heat pump, thermal conductivity, borehole heat exchanger, thermal response test |
| Abstract | To design borehole heat exchangers (BHE) for Ground Source Heat Pumps (GSHP) or Underground Thermal Energy Storage (UTES), the knowledge of underground thermal properties is paramount. In small plants (residential houses), these parameters usually are estimated. However, for larger plants (commercial GSHP or UTES) the thermal conductivity should be measured on site. A useful tool to do so is a thermal response test, carried out on a BHE in a pilot borehole (later to be part of the borehole field). For a thermal response test, basically a defined heat load is put into the hole and the resulting temperature changes of the circulating fluid are measured. Since late 1990s, this technology became more and more popular, and today is used routinely in many countries for the design of larger plants with BHEs, allowing sizing of the boreholes based upon reliable underground data. The paper includes a short description of the basic concept and the theory behind the thermal response test, looks at the history of its development, and then refers the commercial experience of UBeG GbR with this technology. |