| Abstract |
Production system design studies often include sitespecific silica scaling field experiments, conducted because the onset and rate of scaling are believed difficult to predict, particularly at relatively low levels of oversaturation such as may exist in separators, flowlines, and injection wells. However, observed scaling occurrences (Cerro Prieto, Dixie Valley, Svartsengi, Otake, Hatchobaru, Milos, experimental work) actually conform fairly well to existing theory and rate equations. It should be possible to predict low level scaling with sufficient confidence for production and injection system design and, in cases where oversaturation is allowed, to design systems with foresight to suppress or manage the scale which develops. A promising suppression techcology is fluid pH reduction by mixing with non-condensible gases and/or condensate. Calculations for injection lines at Uenotai geothermal field indicate molecular deposition at rates of 0.1 to 1 mm/yr, and some potential for particle deposition at points of turbulence, which can be suppressed by an order of magnitude with about 500 ppm CO,. Further improvements of predictive technique will benefit from more uniformity in designing experiments, reporting results. and reporting measurements of scaling in actual production systems. |